G3 pump merupakan pompa electric yang sering dipakai pada peralatan tambang dan industri bahan body terbuat plastic dan tanki terbuat aklirik transparan, dalam pengembangannya G3 terbaru meggunakan body aluminium dan tanki terbuat aklirik transparan,
Typical Application
Lubrication Used
| Pump Output Pressure 5100 psi | 35.1 MPa, 351.6 bar |
|---|---|
| Fill Inlet Pressure 5000 psi | 34.4 MPa, 344.7 bar |
| Power : | 100-240 VAC 88 - 264 VAC; 0.8 A current, 90 VA Power, 47/63 Hz, Single phase, inrush/locked rotor, max 40A (1ms) 12 VDC 9 - 16 VDC 5 A current, 60 W, inrush/locked rotor 12 A 24 VDC 18 - 32 VDC 2.5 A current, 60 W, inrush/locked rotor 6 A |
| Outputs - Alarm Relay : | Rated Load Resistive: 0.4 A at 125 VAC, 2 A at 30 VDC Inductive: 0.2 A at 125 VAC, 1 A at 30 VDC Max Operation Voltage Resistive: 250 VAC, 220 VAC Inductive: 250 VAC, 220 VDC Max Operating Current Resistive: 3 A (AC), 3A (DC) Inductive: 1.5 A (AC), 1.5 A (DC) Max Switching Capacity Resistive: 50 VA, 60 W Inductive: 25 VA, 30 W Min Permissible Load Resistive: 10 µA, 10m VDC Inductive: 10 µA, 10m VDC Outputs - Vent Valve Required Vent Valve Type Normally closed |
| Output Voltage : | 100/240 VAC 24 VDC12 VDC Input Voltage24 VDC Input Voltage Max Operating Current 2 A Max Operating Power 48 W Inputs - Cycle Pressure, 1, 2, 3, Machine Count Required Switch Type Normally open (sink, source, or dry contact) |
| Sensor Voltage: | 100/240 VAC 24 VDC 12 VDC Input Voltage 24 VDC Input Voltage |
| Load Current : | 100/240 VAC 22mA @ 24 VDC 12 VDC 11mA @ 12 VDC 24 VDC 22mA @ 24 VDC |
| Maximum Residual Voltage : | 100/240 VAC 4 V 12 VDC 2 V 24 VDC 4 V |
| Maximum Off Current : | 100/240 VAC 1.5 mA 12 VDC 1 mA 24 VDC 1.5 mA |
| Input Impedance | 1.1 K |
| Response Time | 60 ms |
| Cycle Rate | 8.0 Hz (50% duty cycle |
| Fluid : | Grease Models Grease NLGI 000 - #2 Oil Models At least 40 cSt oil. Pumps Up to 3 |
| Pump Output : | 0.12 in.3 (2 cm3) / minute per outlet - 2 spacers 0.18 in.3 (3 cm3) / minute per outlet - 1 spacer 0.25 in.3 (4 cm3) / minute per outlet - 0 spacers |
| Pump Outlet | 1/4-18 NPSF. Mates with 1/4-18 NPT male fittings |
| Reservoir Size | 2, 4, 8, 12, 16 Liters |
| IP Rating | IP69K |
| Sensor Inputs | 3 (any of pressure or cycle) 1 (machine count) |
| Ambient Temps | -40°F - 158°F (-40°C to 70°C) |
| Weight (Dry - includes power cord and plug) | Without follower plate 13.3 lbs (6.03 kg) With follower plate 14.2 lbs (6.44 kg) |
| Wetted Parts: | nylon 6/6 (PA), amorphous polyamide, zinc plated steel,carbon steel, alloy steel, stainless steel, nitrile rubber (buna-N), bronze, nickel plated alnico, chemically lubricated acetal, aluminum, PTFE |
| Sound Data | <60 dB |
PT. Rafaga Bangun Industri adalah perusahaan penyedia produk dan jasa untuk alat berat dan industrial. Fokus dari bisnis kami adalah menyediakan spare parts & accessories serta pemasangan Automatic Lubrication System, Automatic Fire Suppression System dan Piping Hydraulic System. PT. Rafaga Bangun Industri berkomitmen untuk menyediakan produk yang berkualitas dan sesuai dengan kebutuhan customer.
Ruko Maison De Wisteria, Jl. Menteng Niaga No.23 Collins 1, Ujung Menteng, Kec. Cakung, Kota Jakarta Timur, Daerah Khusus Ibukota Jakarta 13960
Telepon : 021 38865209 ( Admin )
Email : ariadi@rafaga.co.id
© PT. Rafaga Bangun Industri 2026 All right reserved.
